Replacements

Quantities: Keel strip for a 17 ft 6 inch kayak: 500 grams of gel with 5% pigment, 5% styrene wax. Add the same volume of glass bubbles with 6 cc of catalyst.

• A 2 inch (50 mm)

As standard this seat comes set in the middle position and can be set 12 mm (½″) forward or backward by the paddler.

Changing the seat position can help the paddler to feel more

To fit the footrests in a boat, first work out where you want to fit them. On the outside of the boat, mark where you want the closest bolt to go through the hull. Place a bit of masking tape

Equipment needed: Hand router, acetone, adequate safety equipment, 40 grit sandpaper, marker pen, masking tape, tape measure, kayak stands, cloths.

• Remove all accessories (backrest

To replace the wire first, remove the old wire by loosening the grub screw in the slider knob. Pull the skeg blade down and release the retaining screw on the wire. To replace the wire, fit one

As we don't do these skegs anymore, unfortunately we don't stock the parts. You can get the plastic slider from P&H with the grub screw and the steel slider bar from Valley. You will have to

• Place the foam pad loose on the hull of the boat
• Twist the seat and place it on top of the foam pad
• Line up the centreline of the seat with the centreline of the

All the Kari-tek skegs are available as a retro fit kit complete with instructions on how to fit them. For more information please see the Kari-tek website.

...

• Equipment needed: Seat, adjustable plastic side parts and four bolts, backrest, foam seat pad, Allen key set, acetone, tape measure, cloths, spatula, mixing board, heavy weight (small bag